Philips Dynalite DNG100BT 10/100BaseT Ethernet

Description

Supply 230V ±14% 50/60Hz Single Phase at < 0.1A

Serial Ports 1 x RS485 DyNet serial port 1 x 10/100BaseT

Ethernet Gateway mode
The DNG100BT provides an Ethernet interface to a Dynalite network.
5 gateway modes are available:
1. Passive TCP – In this mode the local DNG awaits a TCP connection made by a remote DNG or PC
application. DyNet Packets are transported using TCP Packets. This option is good for point-to-point
networks over the internet.
2. Active TCP – In this mode the local DNG initiates and maintains a TCP connection to a remote
DNG. DyNet Packets are transported using TCP Packets.
3. UDP – In this mode the local DNG relays DyNet messages to multiple other DNG‟s. DyNet Packets
are transported using Broadcast UDP Packets. This option is good for multi-device networks within
intranets.
4. HTML – In this mode the DNG hosts basic WebPages that can be used to send commands to and
show status of the Dynalite network. A CGI interface provides the dynamic content for those pages.
This option is good for providing a customized user interface to the Dynalite network.
5. Telnet – In this mode the local DNG awaits a TCP connection made by a remote Ethernet enabled
device or PC application. The DyNet Text protocol can be used to send commands to and retrieve
status from the Dynalite network. This option is good for integration to third party devices that are
Ethernet enabled.
More information can be found in the “DyNet Integrators hand book for the DNG100BT”